Many consultants in the RO water treatment industry recommend sulfuric acid dosing into the feed water as a
safety measure. This case study reviews a situation where acid dosing was used with the intention of
improving system performance but resulted in severe sulfate scaling. The difficulties in cleaning sulfate scales
are discussed and after numerous lengthy trials, an effective cleaning procedure is found and implemented.
Interested in some of the other papers published by AWC ?
Visit our Case Studies
THE PERILS OF USING CHLORAMINES FOR PRETREATMENT...
Calcium carbonate (CaCO3) is the most frequently encountered scale in industrial reverse osmosis...
A Novel Calcium Carbonate Scaling Model For...
Calcium carbonate (CaCO3) is the most frequently encountered scale in industrial reverse osmosis...
The Impact of Ferrous Ion Oxidation on Silica...
A 6 MGD reverse osmosis plant in South Texas that was using chlorine to oxidize arsenic for...
Controlling Aluminum Silicate Formation in...
Silica scaling is very common in reverse osmosis systems that operate at high recoveries. Whenever...
An Evaluation of Corrosion Control Additives for...
Corrosion inhibitors are frequently used as post-treatment chemicals for potable RO plants around...
A Relationship Between Phosphate Scales and...
Precipitation of calcium phosphate scale on RO membranes continues to be a major challenge for...
Excessive Sulfuric Acid Dosing Resulting in...
Many consultants in the RO water treatment industry recommend sulfuric acid dosing into the feed...
Optimizing Scale Inhibition Costs in Reverse...
Over the last few decades, advancements in technology and engineering design have allowed for the...
